hi - new user of linux here! just installed lubuntu-22.04.2-desktop-amd64.iso on my 2011 HP DM1z. it has a 64bit amd fusion 2 core processor and 8G of ram
it is running extremely slow… taking several seconds to respond to opening any app i click and not really keeping up with my key strokes
is there something i can do? or is this laptop not powerful enought to run Lubuntu? I was hoping to turn this little guy into a home server/ home automation server
No, you should be experiencing better performance with those hardware stats.
My first check would be to see what (if anything) is consuming your CPU resources.
Application menu > System Tools > qps
Then I’d sort by CPU, just to make it more obvious, and I’d look to see if something is using a high percentage of the CPU’s compute cycles.
That is where I would start.
Have you enabled an appropriate level of swap for your system usage?
I almost always tweak the default swap install, especially on older/resource-limited boxes; or when I forget the moment I notice performance is less than I expect. The default install provided by calamares is too small in my opinion, but we cannot change that (yet).
I’d also check the health of your drive, a new installation will likely have been placed on a different part of the disk you were using before, so exploring system logs look for clues can be useful, plus the usual SMART checks from live media I perform on any unexpected behavior with a box.
You didn’t mention what apps, which does matter. If it’s a snap for example, the initial run has a lot of setup/unsquashing to perform before execution can start, if the app is a GTK app those libraries/toolkits will need to be loaded into RAM as your desktop uses Qt etc…
From what you provided - I’d start with system logs, then the hardware checks (but that’s just as its something I do on any unexpected issue…).
hmm i followed your suggestions.
after reboot, only gnome system monitor using 10% cpu or less. every other process almost 0
my swap is set to 500MB (i have 8 GB ram and 250GB drive)
i found instructions online to use fallocate to increase it to 4GB but error message say
fallocate failed! text file busy
WHY IS THIS?
one other thing i notice is when machine starts i get a warngin
__common__interrupt: 1.55 no irq handler for vector
NOT SURE IF THIS IS IMPORTANT?
You’ve not said what instructions you followed, but if you followed our instructions found here which the swap FAQ link I provided pointed to, it gave instructions to check if swap was already enabled first, then to deactivate it, remove the old swapfile then re-create the desired size swapfile. My guess is you skipped the deactivate & remove steps (esp. deactivate which is I suspect why it said it was busy).
I agree with KGIII. Your hardware should be more than enough for running Lubuntu, without any performance problems at all.
A pretty safe way to test the effectiveness of enlarging the swap space would be to add a second swapfile (and leave the exiting swap partition or swap file in place). It is questionable wether adding swap space would give you any improvement. Reading mail with Thunderbird, browsing the same time with Firefox with multiple tabs open, should be absolutely possible with a good performance, on your machine with 8GB and 512 MB swap.
Most likely you have a memory problem. Perhaps one of the DRAM sticks is fawlty. I would leave the swapfile intact, and reboot with one module removed, round robin. Just see what happens.
That is where I would continue, if I was having such a bad, bad performance like you describe.
I’ve found the following quote on askubuntu.com, by a guy called popeye, from 2010 already, but it is still very valid:
"Just because swap is allocated, doesn’t mean it’s being ‘used’. Whilst programs like system monitor and top will show some of your swap space being allocated (in your example 770MB) that doesn’t mean that the system is actively swapping in/out.
To find out if anything is swapping in/out you can use the
vmstatcommand. Leave it running a few seconds to settle down and watch thesi(swapin) andso(swapout) columns. If nothing is happening then there is no reason to be concerned."
Maybe you’ll find it Interesting to try the following in a terminal, and follow a bit what is happening:
$ vmstat 1
It goes on forever. You can end it with Ctrl+C.
For reference, I’ve done some tests on equal machines with 2GB and 4GB, and 512MB swap space. When opening Thunderbird and Firefox with twelve tabs the 4GB machine does not show any signs of swapping. The 2GB machine shows a little oscillation of si and so, after six tabs or so, but the machine is not noticable slowing down. Not at all.
Update
I forgot something. I think your machine is still capable (after you’ve solved the current problem) for many years to go with Lubuntu. 8GB, 2 cores at 1.6GHz (if I’ve read it correctly), 11.6". Nice small form-factor.
Not bad at all. But, maybe the RAM is soldered in (bad luck if it is broken) or/and the hard disk is with moving parts (2011, many laptops shipped with traditional disks, not SSD). If it is HD, swapping to it would mean a catastrophic performance penalty compared to SSD). If you still like your machine, I advice you to upgrade the HD to SSD. It sure is worth it.
Update 2
There are other, more economic solutions for home automation servers, with a much smaller ecological footprint.
@Fritz thanks for the suggestion. i ran vmstat 1 but i dont see any usage of swap (si and so columns are zeros) . so im guessing that is not the problem.
not sure what else to do to try to debug this lousy performance
Can you reboot the machine, and then share the output of sudo dmesg with us? I’m wondering if maybe there’s some sort of kernel incompatibility, perhaps ACPI-related.
@ArrayBolt3 thanks for your help. here is the output of dmesg. as i mentioned, the machine is so incredibly slow to respond. i reran the monitoring tool again and only see a few % of cpu being used by a couple of processes.
NOTE this is only 1/2 of the file… this platform wont let me attach the full file…
[ 0.000000] Linux version 5.19.0-35-generic (buildd@lcy02-amd64-020) (x86_64-linux-gnu-gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #36~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Feb 17 15:17:25 UTC 2 (Ubuntu 5.19.0-35.36~22.04.1-generic 5.19.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-35-generic root=UUID=57e2c8a6-3927-4537-95fa-4ad1239983ae ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] signal: max sigframe size: 1440
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfa3efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfa3f000-0x00000000dfabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfebefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dfef6000-0x00000000dfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dff00000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000206ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000207000000-0x000000021effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dm1 Notebook PC/1611, BIOS F.13 07/07/2011
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.074 MHz processor
[ 0.007366] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.007376] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.007399] last_pfn = 0x207000 max_arch_pfn = 0x400000000
[ 0.007542] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.007774] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
[ 0.018160] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[ 0.018227] Using GB pages for direct mapping
[ 0.019820] RAMDISK: [mem 0x287b7000-0x303d2fff]
[ 0.019840] ACPI: Early table checksum verification disabled
[ 0.019851] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[ 0.019866] ACPI: XSDT 0x00000000DFEF5120 000064 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.019884] ACPI: FACP 0x00000000DFEF4000 0000F4 (v04 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[ 0.019904] ACPI: DSDT 0x00000000DFEE7000 00972F (v01 HP INSYDE F0000000 ACPI 00040000)
[ 0.019915] ACPI: FACS 0x00000000DFC96000 000040
[ 0.019923] ACPI: FACS 0x00000000DFC96000 000040
[ 0.019932] ACPI: HPET 0x00000000DFEF3000 000038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.019941] ACPI: APIC 0x00000000DFEF2000 000084 (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.019951] ACPI: MCFG 0x00000000DFEF1000 00003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.019961] ACPI: BOOT 0x00000000DFEE6000 000028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.019971] ACPI: SLIC 0x00000000DFEE5000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.019980] ACPI: SSDT 0x00000000DFEE4000 0003DE (v01 HP INSYDE 00000001 AMD 00000001)
[ 0.019990] ACPI: SSDT 0x00000000DFEE2000 0012FA (v02 HP INSYDE 00000001 MSFT 04000000)
[ 0.019999] ACPI: Reserving FACP table memory at [mem 0xdfef4000-0xdfef40f3]
[ 0.020003] ACPI: Reserving DSDT table memory at [mem 0xdfee7000-0xdfef072e]
[ 0.020006] ACPI: Reserving FACS table memory at [mem 0xdfc96000-0xdfc9603f]
[ 0.020009] ACPI: Reserving FACS table memory at [mem 0xdfc96000-0xdfc9603f]
[ 0.020011] ACPI: Reserving HPET table memory at [mem 0xdfef3000-0xdfef3037]
[ 0.020014] ACPI: Reserving APIC table memory at [mem 0xdfef2000-0xdfef2083]
[ 0.020017] ACPI: Reserving MCFG table memory at [mem 0xdfef1000-0xdfef103b]
[ 0.020020] ACPI: Reserving BOOT table memory at [mem 0xdfee6000-0xdfee6027]
[ 0.020022] ACPI: Reserving SLIC table memory at [mem 0xdfee5000-0xdfee5175]
[ 0.020025] ACPI: Reserving SSDT table memory at [mem 0xdfee4000-0xdfee43dd]
[ 0.020028] ACPI: Reserving SSDT table memory at [mem 0xdfee2000-0xdfee32f9]
[ 0.020554] No NUMA configuration found
[ 0.020558] Faking a node at [mem 0x0000000000000000-0x0000000206ffffff]
[ 0.020588] NODE_DATA(0) allocated [mem 0x206fd5000-0x206ffffff]
[ 0.021784] Zone ranges:
[ 0.021787] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.021793] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.021798] Normal [mem 0x0000000100000000-0x0000000206ffffff]
[ 0.021802] Device empty
[ 0.021805] Movable zone start for each node
[ 0.021812] Early memory node ranges
[ 0.021813] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.021817] node 0: [mem 0x0000000000100000-0x00000000dfa3efff]
[ 0.021821] node 0: [mem 0x00000000dfef6000-0x00000000dfefffff]
[ 0.021824] node 0: [mem 0x0000000100000000-0x0000000206ffffff]
[ 0.021831] Initmem setup node 0 [mem 0x0000000000001000-0x0000000206ffffff]
[ 0.021850] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.022006] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.059833] On node 0, zone DMA32: 1207 pages in unavailable ranges
[ 0.104409] On node 0, zone Normal: 256 pages in unavailable ranges
[ 0.104626] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.104937] ACPI: PM-Timer IO Port: 0x408
[ 0.104962] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.104969] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.104973] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.104976] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.105008] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.105017] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.105023] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.105035] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.105038] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.105054] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.105107] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.105113] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.105116] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.105119] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.105124] PM: hibernation: Registered nosave memory: [mem 0xdfa3f000-0xdfabefff]
[ 0.105127] PM: hibernation: Registered nosave memory: [mem 0xdfabf000-0xdfebefff]
[ 0.105129] PM: hibernation: Registered nosave memory: [mem 0xdfebf000-0xdfef5fff]
[ 0.105134] PM: hibernation: Registered nosave memory: [mem 0xdff00000-0xdfffffff]
[ 0.105137] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.105139] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.105141] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.105143] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.105146] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.105148] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.105150] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.105152] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.105155] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.105157] PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.105162] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.105165] Booting paravirtualized kernel on bare hardware
[ 0.105172] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.105196] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.106828] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
[ 0.106853] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
[ 0.106862] pcpu-alloc: [0] 0 1 2 3
[ 0.106957] Fallback order for Node 0: 0
[ 0.106969] Built 1 zonelists, mobility grouping on. Total pages: 1961887
[ 0.106973] Policy zone: Normal
[ 0.106977] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-35-generic root=UUID=57e2c8a6-3927-4537-95fa-4ad1239983ae ro quiet splash vt.handoff=7
[ 0.107209] Unknown kernel command line parameters “splash BOOT_IMAGE=/boot/vmlinuz-5.19.0-35-generic”, will be passed to user space.
[ 0.111641] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.113889] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.113999] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.282261] Memory: 7594936K/7972764K available (18440K kernel code, 4050K rwdata, 11288K rodata, 3168K init, 4908K bss, 377568K reserved, 0K cma-reserved)
[ 0.283303] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.283362] ftrace: allocating 52174 entries in 204 pages
[ 0.300037] ftrace: allocated 204 pages with 4 groups
[ 0.301590] Dynamic Preempt: voluntary
[ 0.301734] rcu: Preemptible hierarchical RCU implementation.
[ 0.301738] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.301744] Trampoline variant of Tasks RCU enabled.
[ 0.301745] Rude variant of Tasks RCU enabled.
[ 0.301747] Tracing variant of Tasks RCU enabled.
[ 0.301749] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.301752] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.317245] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.317614] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.317752] spurious 8259A interrupt: IRQ7.
[ 0.317804] Console: colour dummy device 80x25
[ 0.317853] printk: console [tty0] enabled
[ 0.317938] ACPI: Core revision 20220331
[ 0.318302] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.318338] APIC: Switch to symmetric I/O mode setup
[ 0.318759] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.338355] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1701a8389e4, max_idle_ns: 440795272589 ns
[ 0.338378] Calibrating delay loop (skipped), value calculated using timer frequency… 3192.14 BogoMIPS (lpj=6384296)
[ 0.338387] pid_max: default: 32768 minimum: 301
[ 0.338588] LSM: Security Framework initializing
[ 0.338639] landlock: Up and running.
[ 0.338642] Yama: becoming mindful.
[ 0.338750] AppArmor: AppArmor initialized
[ 0.338984] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.339052] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.340021] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.340038] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.340055] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.340062] Spectre V2 : Mitigation: Retpolines
[ 0.340065] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.340067] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.340071] Speculative Store Bypass: Vulnerable
[ 0.379025] Freeing SMP alternatives memory: 44K
[ 0.491886] smpboot: CPU0: AMD E-350 Processor (family: 0x14, model: 0x1, stepping: 0x0)
[ 0.492501] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.492512] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.492620] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.492688] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.492769] Performance Events: AMD PMU driver.
[ 0.492783] … version: 0
[ 0.492786] … bit width: 48
[ 0.492789] … generic registers: 4
[ 0.492791] … value mask: 0000ffffffffffff
[ 0.492794] … max period: 00007fffffffffff
[ 0.492797] … fixed-purpose events: 0
[ 0.492799] … event mask: 000000000000000f
[ 0.493085] rcu: Hierarchical SRCU implementation.
[ 0.493089] rcu: Max phase no-delay instances is 1000.
[ 0.494365] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.494365] smp: Bringing up secondary CPUs …
[ 0.494365] x86: Booting SMP configuration:
[ 0.494365] … node #0, CPUs: #1
[ 0.004710] __common_interrupt: 1.55 No irq handler for vector
[ 0.502538] smp: Brought up 1 node, 2 CPUs
[ 0.502538] smpboot: Max logical packages: 2
[ 0.502538] smpboot: Total of 2 processors activated (6384.29 BogoMIPS)
[ 0.503943] devtmpfs: initialized
[ 0.503943] x86/mm: Memory block size: 128MB
[ 0.508112] ACPI: PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfebefff] (4194304 bytes)
[ 0.508112] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.508112] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.508112] pinctrl core: initialized pinctrl subsystem
[ 0.508112] PM: RTC time: 19:39:18, date: 2023-03-10
[ 0.511505] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.512423] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.513034] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.513633] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.513702] audit: initializing netlink subsys (disabled)
[ 0.513983] audit: type=2000 audit(1678477157.192:1): state=initialized audit_enabled=0 res=1
[ 0.514790] thermal_sys: Registered thermal governor ‘fair_share’
[ 0.514801] thermal_sys: Registered thermal governor ‘bang_bang’
[ 0.514805] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.514808] thermal_sys: Registered thermal governor ‘user_space’
[ 0.514810] thermal_sys: Registered thermal governor ‘power_allocator’
[ 0.514830] EISA bus registered
[ 0.514868] cpuidle: using governor ladder
[ 0.514883] cpuidle: using governor menu
[ 0.514943] Simple Boot Flag at 0x44 set to 0x1
[ 0.514943] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB
[ 0.514943] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.515024] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.515040] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.515083] PCI: Using configuration type 1 for base access
[ 0.515350] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.515354] mtrr: probably your BIOS does not setup all CPUs.
[ 0.515355] mtrr: corrected configuration.
[ 0.521272] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.542694] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.542715] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.542720] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.544214] fbcon: Taking over console
[ 0.544307] ACPI: Added _OSI(Module Device)
[ 0.544311] ACPI: Added _OSI(Processor Device)
[ 0.544315] ACPI: Added _OSI(3.0 SCP Extensions)
[ 0.544318] ACPI: Added OSI(Processor Aggregator Device)
[ 0.544323] ACPI: Added OSI(Linux-Dell-Video)
[ 0.544326] ACPI: Added OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.544330] ACPI: Added OSI(Linux-HPI-Hybrid-Graphics)
[ 0.570442] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.573923] ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored
[ 0.575461] ACPI: EC: EC started
[ 0.575473] ACPI: EC: interrupt blocked
[ 0.580272] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.580282] ACPI: _SB.PCI0.LPC0.EC: Boot DSDT EC used to handle transactions
[ 0.580287] ACPI: Interpreter enabled
[ 0.580346] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.580351] ACPI: Using IOAPIC for interrupt routing
[ 0.581042] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.581047] PCI: Using E820 reservations for host bridge windows
[ 0.581669] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.603489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.603520] acpi PNP0A08:00: OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.604015] acpi PNP0A08:00: OSC: platform does not support [SHPCHotplug PME LTR DPC]
[ 0.604826] acpi PNP0A08:00: OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[ 0.604859] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.605197] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.605852] PCI host bridge to bus 0000:00
[ 0.605859] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.605866] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.605871] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.605877] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cbfff window]
[ 0.605882] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[ 0.605887] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.605893] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xffffffff window]
[ 0.605899] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.605942] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.606121] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.606142] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.606155] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff]
[ 0.606167] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
[ 0.606204] pci 0000:00:01.0: enabling Extended Tags
[ 0.606230] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.606269] pci 0000:00:01.0: supports D1 D2
[ 0.606507] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.606526] pci 0000:00:01.1: reg 0x10: [mem 0xf0244000-0xf0247fff]
[ 0.606573] pci 0000:00:01.1: enabling Extended Tags
[ 0.606624] pci 0000:00:01.1: supports D1 D2
[ 0.606752] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.606801] pci 0000:00:04.0: enabling Extended Tags
[ 0.606863] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.607098] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
[ 0.607145] pci 0000:00:05.0: enabling Extended Tags
[ 0.607205] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.607472] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.607499] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
[ 0.607516] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
[ 0.607531] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
[ 0.607547] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
[ 0.607563] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
[ 0.607579] pci 0000:00:11.0: reg 0x24: [mem 0xf024e000-0xf024e3ff]
[ 0.607774] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.607801] pci 0000:00:12.0: reg 0x10: [mem 0xf024d000-0xf024dfff]
[ 0.608143] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.609506] pci 0000:00:12.2: reg 0x10: [mem 0xf024c000-0xf024c0ff]
[ 0.613526] pci 0000:00:12.2: supports D1 D2
[ 0.613542] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.613924] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.613955] pci 0000:00:13.0: reg 0x10: [mem 0xf024b000-0xf024bfff]
[ 0.614459] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.615807] pci 0000:00:13.2: reg 0x10: [mem 0xf024a000-0xf024a0ff]
[ 0.619690] pci 0000:00:13.2: supports D1 D2
[ 0.619706] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.620097] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.620461] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.620496] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
[ 0.620598] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.620810] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.621126] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.621410] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.621437] pci 0000:00:16.0: reg 0x10: [mem 0xf0249000-0xf0249fff]
[ 0.621743] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.623032] pci 0000:00:16.2: reg 0x10: [mem 0xf0248000-0xf02480ff]
[ 0.627101] pci 0000:00:16.2: supports D1 D2
[ 0.627118] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.627506] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.627658] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.627797] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.627946] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.628173] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.628319] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.628456] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.628615] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.628932] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.628961] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.628996] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.629020] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.629140] pci 0000:01:00.0: supports D1 D2
[ 0.629145] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.629443] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.629455] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.629467] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.629632] pci 0000:02:00.0: [1814:539f] type 00 class 0x028000
[ 0.629686] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf010ffff]
[ 0.630161] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.630174] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.630391] pci_bus 0000:03: extended config space not accessible
[ 0.630517] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.630533] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.630540] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.630545] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.630551] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000cbfff window] (subtractive decode)
[ 0.630556] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000effff window] (subtractive decode)
[ 0.630562] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[ 0.630567] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff window] (subtractive decode)
[ 0.632159] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.632475] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.632794] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.633122] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.633390] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.633616] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.633827] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.634053] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.635781] ACPI: EC: interrupt unblocked
[ 0.635791] ACPI: EC: event unblocked
[ 0.635798] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.635802] ACPI: EC: GPE=0x16
[ 0.635809] ACPI: _SB.PCI0.LPC0.EC: Boot DSDT EC initialization complete
[ 0.635815] ACPI: _SB.PCI0.LPC0.EC: EC: Used to handle transactions and events
[ 0.636019] iommu: Default domain type: Translated
[ 0.636019] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.636019] SCSI subsystem initialized
[ 0.636019] libata version 3.00 loaded.
[ 0.636019] ACPI: bus type USB registered
[ 0.636019] usbcore: registered new interface driver usbfs
[ 0.636019] usbcore: registered new interface driver hub
[ 0.636019] usbcore: registered new device driver usb
[ 0.636019] pps_core: LinuxPPS API ver. 1 registered
[ 0.636019] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.636019] PTP clock support registered
[ 0.638466] EDAC MC: Ver: 3.0.0
[ 0.639045] NetLabel: Initializing
[ 0.639057] NetLabel: domain hash size = 128
[ 0.639060] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.639129] NetLabel: unlabeled traffic allowed by default
[ 0.639183] mctp: management component transport protocol core
[ 0.639183] NET: Registered PF_MCTP protocol family
[ 0.639183] PCI: Using ACPI for IRQ routing
[ 0.643551] PCI: pci_cache_line_size set to 64 bytes
[ 0.643737] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.643744] e820: reserve RAM buffer [mem 0xdfa3f000-0xdfffffff]
[ 0.643748] e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff]
[ 0.643751] e820: reserve RAM buffer [mem 0x207000000-0x207ffffff]
[ 0.643846] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.643846] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.643846] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.643846] vgaarb: loaded
[ 0.643846] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.643846] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.646440] amd_nb: x86/cpu/AMD: CPU erratum 688 worked around
[ 0.646566] clocksource: Switched to clocksource tsc-early
[ 0.647125] VFS: Disk quotas dquot_6.6.0
[ 0.647205] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.647844] AppArmor: AppArmor Filesystem Enabled
[ 0.647924] pnp: PnP ACPI init
[ 0.648614] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.648629] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.649761] system 00:04: [io 0x0400-0x04cf] has been reserved
[ 0.649776] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.649783] system 00:04: [io 0x04d6] has been reserved
[ 0.649791] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.649798] system 00:04: [io 0x077a] has been reserved
[ 0.649805] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.649813] system 00:04: [io 0x0c14] has been reserved
[ 0.649820] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.649827] system 00:04: [io 0x0c6c] has been reserved
[ 0.649834] system 00:04: [io 0x0c6f] has been reserved
[ 0.649841] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.650074] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.650087] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.656776] pnp: PnP ACPI: found 6 devices
[ 0.669153] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.669457] NET: Registered PF_INET protocol family
[ 0.670213] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.676051] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.676245] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.676544] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.677440] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.678146] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.678813] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.679022] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.679163] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.679418] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.679455] NET: Registered PF_XDP protocol family
[ 0.679516] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.679531] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.679545] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.679557] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.679566] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.679580] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.679629] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.679636] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
It would have been better if you provided the whole file, using a pastebin type site.
eg. sudo dmesg |pastebinit
then provide the link in your comment here.
I realize you followed the instructions @ArrayBolt3 provided, but if I hit size limit I’d have switched to using such a site, and there are many that allow pasting text from your browser